01
Problem first
We score the operating need, not the product page.
CashPrime Operations Advisor/Product fit check
Five operating signals separate the visible symptom from the real requirement. The result may confirm this product, connect it to another layer, or tell you not to buy yet.
Product fit check
We will test whether this product addresses the root requirement or only the visible symptom.
We score the operating need, not the product page.
A result can confirm, qualify, or reject the current route.
Hardware, controls, data, service, and workflow stay connected.
Continue the equipment journey
Compare fit, test capacity assumptions, then bring the shortlist into a deployment conversation.
Equipment fit
Equipment fit
Your operating scope travels with you
Explore and save equipment, ARKASH modules, and operating touchpoints to build a live decision brief.
Desktop Vacuum Banknote Piece Counter
Desktop vacuum banknote piece counter for loose or strapped notes. The manufacturer specifies a 100-note counting cycle under 4 seconds and a 210-note capacity. Counts pieces, not denomination values.
A 22 kg desktop unit for cash desks and bank back offices. Check worktop space and load capacity before installation.
Vacuum feeding handles loose and strapped banknotes by piece count without relying on a currency profile.
Counts banknotes by piece without relying on currency or denomination recognition; supported note conditions should be confirmed during testing.
Digital LCD count display, with manufacturer-listed operating noise below 60 dB.
Manufactured in China by
Zhejiang Wanlian Electric Co., Ltd.
UN-T2000
Official two-page CashPrime edition
Contact CashPrime for a custom quote or a live demonstration of the UN-T2000.
UN-T2000 desktop fit
UN-T2000 is a 22 kg desktop vacuum piece counter measuring 360 × 275 × 260 mm. Its reviewed brochure states a 210-note capacity, a 100-note cycle in under four seconds and a 220 V, 50 Hz supply.
Acceptance checkpoint
Confirm the 220 V / 50 Hz site supply and remember that the result is a piece count, not denomination value.
Best fit
Use it where operators need vacuum piece counting beside an existing preparation or reconciliation bench and the surface is rated for the machine load.
Acceptance test
Confirm stable feeding with loose and strapped samples, then measure loading, removal and recounts from the intended seated or standing position.
Choose UN-K2000 when
Use the taller 38 kg floor-standing model when bench capacity is constrained or the cash room is designed around a dedicated independent counting position.
Turn the page into a testable decision.
Capture the workload, constraint and required evidence, then review the fit with an operations specialist.